VolcanoBox Inferno UniTool 1.4.1 Huawei Modems & Custom Partition by Logical Block

on


What's new in VolcanoBox Inferno UniTool 1.4.1



What's new in VolcanoBox Inferno UniTool 1.4.1
  • Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
  • Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
  • Fixed some VIVO phones not detecting by selecting Auto cpu.
How to Unlock Huawei Modems with Inferno ? 
  • Open Inferno UniTool 1.4.1
  • Go to Huawei -> Modem
  • Connect Huawei Modem in usb
  1. in Normal mode
  • Click on Read info.
  1. make sure you have installed Correct Drivers
  • Check software ver inside your modem.
  • go to back and select Erase and then select carefully your Modem model & Firmware ver
  1. Firmware ver you checked from Read Info.
  2. Check List Below which Modem & Ver Required Erase
  • Connect Test Point
  1. Check List Below which Modem & Ver Required Testpoint
  2. you can download all Test Points from here https://www.mediafire.com/folder/ysz...ems_Test_point
  3. Make Sure in Device Manger have one Huawei port !!
  • Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.
  1. it will automatically reboot after successfully Erased
  2. in device manager it will show 2 ports after successfully Erased.
  • Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver
  1. Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
  2. click on Next and let it patch flash.
  • After Patch Flash success, please look at list what operation needed for POST PATCH Flash.
  1. Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
  2. Some modems need to repair Imei by Inferno UniTool
  3. Some modems need to Code calculate.
  4. You must update your modem Firmware to LATEST Firmware to run super fine.
  5. Make sure you Repair Wifi
  6. Kindly have a look at list below for each modems model.
  • You have to Download HWModem.sys and Place into Inferno Unitool Folder


Complete Details of each ver & steps you have to do while unlock
  • Model: E5330s-B2
    • Supported Ver: 21.210.21.xx.274
    • Test Point: No
    • Erase: No
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E5330s-B2
    • Supported Ver: 21.210.21.xx.306
    • Test Point: No
    • Erase: No
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E5330s-B2
    • Supported Ver: 21.210.21.xx.1065
    • Test Point: No
    • Erase: No
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E5330s-B2
    • Supported Ver: 21.210.25.xx.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: Make Patch Flash Twice
    • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E5330s-B2
    • Supported Ver: 21.210.25.xx.306
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: Make Patch Flash Twice
    • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E5330s-B2
    • Supported Ver: 21.210.25.xx.1065
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: Make Patch Flash Twice
    • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E8231-S1
    • Supported Ver: 22.618.13.xx.274
    • Test Point: No
    • Erase: No
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E8231-S1
    • Supported Ver: 22.618.13.xx.1065
    • Test Point: No
    • Erase: No
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E8231-S1
    • Supported Ver: 22.618.13.xx.306
    • Test Point: No
    • Erase: No
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E8231-S1
    • Supported Ver: 22.618.17.xx.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: Make Patch Flash Twice
    • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E8231-S1
    • Supported Ver: 22.618.17.xx.1065
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: Make Patch Flash Twice
    • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E8231-S1
    • Supported Ver: 22.618.17.xx.306
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: No Need
    • Note: Make Patch Flash Twice
    • Note2: After Patch Flash User Have To Calculate "Huawei Modem V3" Unlock Code from VolcanoBox 3.1.0 or from any website and enter into Modem by putting Wrong Sim Card into Modem.



  • Model: E5573cs-609
    • Supported Ver: 21.318.xx.xx.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase. 



  • Model: E5573cs-609
    • Supported Ver: 21.323.00.00.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase.



  • Model: E8372H-608
    • Supported Ver: 21.316.01.01.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase. 



  • Model: E8372H-608
    • Supported Ver: 21.316.01.02.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase. 



  • Model: E8372H-608
    • Supported Ver: 21.316.01.03.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & then Update Firmware to which has in Modem before Erase. 



  • Model: E8372H-608
    • Supported Ver: 21.316.01.04.274
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



  • Model: E5573cs-322
    • Supported Ver: 21.318.xx.xx.306
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



  • Model: E5573cs-322
    • Supported Ver: 21.323.xx.xx.306
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



  • Model: E8372h-153
    • Supported Ver: 21.313.xx.xx.306
    • Test Point: YES
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.



  • Model: E8372h-153
    • Supported Ver: 21.318.xx.xx.306
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



  • Model: E8372h-153
    • Supported Ver: 21.321.xx.xx.306
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: No Need
    • Imei Repair Command: "at^nvwrex=0,0,16,X X X X X X X X X X X X X X X 0"
    • Note: After Patch Flash, User have to Enter "Repar Imei Command" from "Dc Unlocker" & open Home Page of Modem and write New "Wifi Name"



  • Model: E5573s-320
    • Supported Ver: 21.315.01.00.306
    • Test Point: No
    • Erase: No
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.



  • Model: E5573s-320
    • Supported Ver: 21.315.01.01.306
    • Test Point: Yes
    • Erase: Yes
    • Patch Flash: Yes
    • Unlock Command: at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
    • Imei Repair Command: No Need
    • Note: After Patch Flash, User have to Enter "Unlock Command" from "Dc Unlocker" & Update Firmware to which has in modem.

  • Here is Successfully Repair phones by our Belong Users....

Buy Now: GPGIndustries
VolcanoBox Inferno Trusted Resellers: ➜ ➜ ➜ Inferno Activation & Renewal New Price is DOWN Now & Resellers List ◄ ◄ ◄
Support Area to Download VolcanoBox Inferno: Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_UniTool_Module_Updates/
__________________
Best Regards
Faisal_Computer
General Manager
GPGIndustries



Comments

Post a Comment